Change Up Your Watch

Shop our collection of unique
watch bands below and give your watch a new look.

Search by your watch model to see what's compatible. Or find the band you need by measuring as illustrated below, and shop by size.

Shop By Material

Make it yours; browse our exclusive collection of unique watch band materials.
A brown leather Nixon watch band.
Leather Bands

Buttery-soft and beyond comfortable, our leather watch bands only get better with time.

Shop Leather
A dark blue rubber Nixon watch band.
Rubber Bands

From bikes to boards, climbing to cross-training, these are the bands for those on the move.

Shop Rubber
A sustainable gold Nixon watch band made from recycled or plant-based materials.
Sustainable Bands

Made from recycled plastics or plant-based materials, our eco-friendly bands waste less while you do more.

Shop Sustainable

Band Types

We offer two types of Nixon replacement watch bands. Based on your style, use, and preference, you've got plenty of options in both.
A dark green one piece watch band from Nixon.
One Piece Straps

One piece straps give you superb performance and durability while being extremely lightweight and breathable.

Shop One Piece Straps
A brown quick release watch band from Nixon.
Quick Release

Quick-release bands offer a classic clasp that's both comfortable and stylish. They are easy to swap out, giving you tons of style flexibility.

Shop Quick Release Bands

How Do I Swap My Band?

Each new band comes with all the tools you need.

Steps to Replace One Piece Straps

1. Remove the existing band.

2. Remove the spring bars from the strap that was just removed from the watch.

3. Reinsert the spring bars into the holes in the lugs, using the included tool as needed.

4. Pull the long end of the one piece strap out of the metal loop holding the two pieces together.

5. Slide the long end of the strap down between the spring bar and the watch case, with the short side of the strap facing away and the buckle facing up.

6. Thread the same long side back up through the bottom spring bar, between the pin and the case.

7. Pass the long side back through the metal loop on the short side.

8. Enjoy your new Nixon band!

Steps to Replace Quick Release Bands

1. Remove the existing band.

2. Align the new band with the short side on top (12 o’clock), long side on bottom (6 o’clock) with the quick release pins facing down so they aren’t visible.

3. Using the quick release pin, depress the spring bar on one side of the band, while inserting the pin into the hole in the lug on the other.

4. Slide the depressed side under the lug, and release the pin sliding it around until it clicks into the hole in the lug.

5. Repeat the same process for the other strap.

6. Enjoy your new Nixon band!

Frequently Asked Questions

Compatibility between a replacement band and watch case is dependent on the lug measurement. To find the band size you will need, measure the width of the inside of the lugs that hold the band onto your watch. We also have a measurement size chart for you to print out, if needed. Check out our compatibility list to see if your watch is listed there too!
We can still help! Please visit our Online Repair Center to set up an order to send your watch in for a band replacement and complimentary battery service.
The new band will include the tools needed for replacement. We do not sell this tool separately, so please be careful not to lose it.

The leather and rubber bands we are currently offering are only compatible with watches that have spring bar attachments. The one piece style bands will work with watches that have both spring bar and screw bar attachments.

We offer a variety of bands for lug sizes of 16mm, 20mm, and 23mm.
Leather: While we don't recommend getting leather wet, or fully submerging it, if you are in need of cleaning your leather band, just wipe it with a damp (not wet) cloth and let it air dry.

Silicone/Rubber: Use a soft cloth with warm water and a mild detergent. Make sure to use nothing abrasive and no bleach. You will want to be sure to rinse your watch with fresh water after a surf session.

One Piece/Poly Woven: Use a soft cloth with warm water and a mild detergent. Make sure to use nothing abrasive and no bleach. You will want to be sure to rinse your watch with fresh water after a surf session.
Returns must be unused, unworn, in original packaging with all tags attached, within 30 days of the delivery date. Your refund will be processed within 7 to 10 business days after your return is received. Refunds are issued in the original form of payment. Learn More.
We don't cover normal wear and tear of Nixon watch bands or bracelets, nor loss or theft. Learn More.
Contact our Customer Service team for additional help!